| 标志桩模具/水泥标志桩特性 |
| 添加时间：2020/11/19 14:19:13 浏览次数： |
| 标志桩模具生产工艺原理 Production process principle of marker pile mould ★准备标志桩模具一个，震动平台一个，搅拌好的混凝土 Prepare a mold for the sign pile and a vibration platform, and mix the concrete ★将模具放置在平整的地面上，将混凝土灌入模具中，放在震动平台上震动片刻 Put the mold on the flat ground, pour the concrete into the mold, and put it on the vibration platform to vibrate for a moment ★放置在避光避光的地方养护 It should be placed in a place away from light for maintenance ★夏季钢模具12小时，每天能脱两次模；冬季放置24小时，每天脱一次模；塑料模具夏季24小时；冬季48小时即可。 The steel mold can be removed twice a day for 12 hours in summer; the mold can be removed once a day for 24 hours in winter; the plastic mold can be removed 24 hours in summer and 48 hours in winter. ★待水泥凝固后，自然脱落即可 When the cement solidifies, it will fall off naturally 标志桩模具分类 Classification of mark pile mould 根据材质分为：标志桩钢模具，标志桩塑料模具 According to the material, it can be divided into: steel mould for sign post and plastic mould for marker post 根据区域划分：标志桩模子，标志桩模盒，标志桩钢模子，标志桩塑料模子，标志桩钢模盒，标志桩塑料模盒 Mark, mark, mark, mark, mark, mark, mark, mark, mark, mark, mark 标志桩模具/水泥标志桩特性 Characteristics of mould / cement marker post 利用钣金钢生产标志桩模具，预制标志桩具有脱模快，抗压性，抗击性，寿命长，成本低，价格实惠等特点。 Using sheet steel to produce the mould of sign post, the prefabricated marker post has the characteristics of quick demoulding, compression resistance, resistance, long life, low cost and affordable price. 标志桩模具规格： Mold specification of sign post: 标志桩模具长度通产为1m1.5m宽度，高度可以随客户不同的要求进行定制 The length and width of the mould are 1m1.5m, and the height can be customized according to different requirements of customers |
| 上一页 高铁遮板钢模具板都需求模具 |
| 下一页 路沿石是在路面上区分车行道、人行道、绿地、隔离带和道路其来他部分的界线 |
Copyright © 技术支持：遨游网络