| 人工在安装路缘石时也比较考量人员的技术水平 |
| 添加时间：2019/12/2 13:35:30 浏览次数： |
| 这些重要的工程设备能够为施工带来最大的工作目标实现和最大化的利益体现，那么就要在各个方面对它进行深入的研究和探讨，在各个方面做到尽善尽美，保证各项水平正常运转，为工程建设提供良好的各方面的支持工作。 These important engineering equipment can bring the maximum realization of the work objectives and the maximum embodiment of the interests for the construction, so it is necessary to conduct in-depth research and Discussion on it in all aspects, achieve perfection in all aspects, ensure the normal operation of all levels, and provide good support for the project construction in all aspects. 人工在安装路缘石时也比较考量人员的技术水平，经常会出现由于路面不平整，高低不平，制作后高低也不平，导致返工的情况出现。还会经常由于磕碰损坏路缘石。而预制路沿石滑模机在作业行驶时，遇到路面不平整时，通过螺纹钢拉杆，设置在机器模具上，平行于板的表面，并且和缝隙垂直，在下部舍友胀缝板，上面填充填缝料，缝隙内任何地方不许有其他杂物。来实现平整作业。 Manual installation of curbs also considers the technical level of personnel, which often results in rework due to uneven road surface, uneven height and uneven height after production. Kerbs are often damaged by bumping. When the prefabricated road is running along the stone slip form machine, when the road surface is uneven, it is set on the machine mold through the threaded steel tie rod, parallel to the surface of the plate, and perpendicular to the gap. The lower part of the roommate expansion joint plate is filled with joint filler, and no other sundries are allowed in any part of the gap. To achieve leveling. |
| 上一页 弧线型路沿石主要用于道路曲线段和路口处 |
| 下一页 路沿石的生产加工制作工序 |
Copyright © 技术支持：遨游网络