| 木方子放在地面的宽度不要超过路沿石模具的宽度 |
| 添加时间：2019/10/26 16:26:35 浏览次数： |
| 1：准备两根比模具长度要长的木方子，建议长度比模具长20公分就可以啦，放在带有模具的水泥制品旁边备用，木方子放在地面的宽度不要超过路沿石模具的宽度。 1: prepare two wooden squares that are longer than the length of the mold. It is recommended that the length be 20 cm longer than the mold. Put them beside the cement products with the mold for standby. The width of the wooden squares on the ground should not exceed the width of the curbstone mold. 2：把带有模具的路沿石整体翻过来，整体压在木方子上面，用皮锤轻轻的震动几下，尤其是边边角角的地方多敲几下。 2: turn over the road edge stone with mould as a whole, press it on the wood square as a whole, shake it gently with leather hammer for several times, especially at the corner. 3用双手把住模具长度的两边上下摆动，摆动的同时用力往上拔，一气呵成这两个动作，模具就轻松的脱出来了。 3 hold the two sides of the length of the mold with both hands and swing up and down, while swinging, pull up hard, and form these two actions in one breath, and the mold will easily come out. 在实际操作中可以根据模具的大小来变换方式，这种方法即简单又快捷，脱模工具随处可找，大大提高了劳动效益 In practical operation, the mode can be changed according to the size of the mold. This method is simple and fast, and demoulding tools can be found everywhere, greatly improving the labor efficiency. |
| 上一页 组合式路沿石钢模具包括钢制外模和钢制内模 |
| 下一页 路沿石铺设的作用 |
Copyright © 技术支持：遨游网络