| 塑料路沿石模具生产过程 |
| 添加时间：2018/4/12 10:38:57 浏览次数： |
| 塑料路沿石模具生产过程 The production process of the plastic road along the stone die 流程 Technological process 定量加料——熔融塑化——施压注射——充模冷却——启模取件——试模 Quantitative feeding -- melting and plasticizing -- pressure injection -- filling and cooling -- starting and drawing parts -- Trial mold. 检验 test 模具是否合格需要通过试模来确定试模是指在模具开发和制造流程中在产品完成模具制作后、批量生产前所进行的测试注塑步骤。模具在完成所有配件并装配完毕后，需要通过实际的注塑并得到注塑样品，然后通过样品检测才能确定模具的制作是否完全符合设计要求。 Whether the mold is qualified or not, it is necessary to determine the test mold through the test mold to determine the test injection steps in the mold development and manufacturing process before the product is finished and the batch production is finished. After completing all the parts and assembling the mold, the mold needs to be injected through the actual injection and get the injection sample. Then the sample can be tested to determine whether the mold is completely in conformity with the design requirements. |
| 上一页 全新路沿石塑料模具 |
| 下一页 路沿石模具是用来生产水泥预制路沿石的模具模型 |
Copyright © 技术支持：遨游网络