| 生产过程 |
| 添加时间：2018/3/27 15:23:48 浏览次数： |
| 生产过程 Production process 流程 Technological process 定量加料——熔融塑化——施压注射——充模冷却——启模取件——试模 Quantitative feeding - melt plasticization - pressure injection -- mold filling cooling - model opening - Test Model 检验 test 模具是否合格需要通过试模来确定试模是指在模具开发和制造流程中在产品完成模具制作后、批量生产前所进行的测试注塑步骤。模具在完成所有配件并装配完毕后，需要通过实际的注塑并得到注塑样品，然后通过样品检测才能确定模具的制作是否完全符合设计要求。 Whether the mold is qualified or not, we need to make sure that the trial mold is the test and injection step before the product completes the mold manufacture and batch production in the mold development and manufacturing process. After completing all the parts and assembling, the moulds need to be molded by actual injection and get the injection samples. Then the samples can be checked to make sure whether the mold making is in line with the design requirements. |
| 上一页 路沿石模具是用来生产水泥预制路沿石的模具模型 |
| 下一页 路沿石塑料模具 |
Copyright © 技术支持：遨游网络